One of my clients needed a piece that could serve double duty as a bedside table and a vanity in her small bedroom. When I spotted this compact table at Brimfield, I knew it was the perfect shape and size for her needs. It has a drawer for storing makeup and other supplies, and there is a clear opening at the bottom so it will be a comfortable place to sit. I liked the table’s original mint-colored paint and sweet little decoupage accent, but it was in rough shape and not the right look for my client’s room. So I gave the piece a simple makeover. I sanded down the original finish, applied a coat of primer, two coats of Benjamin Moore Mayonnaise, and two coats of topcoat. If you’re using a light paint color like off-white, it’s best to use a polycrylic topcoat instead of polyurethane, which turns yellow over time. I chose a high gloss polycrylic because it’ll be easier …
In my last post, I showed you the results of a master bedroom makeover. My clients had an existing Ikea Malm dresser that they wanted to keep; it was great storage, but not very stylish. So I decided to give it a makeover and I wanted to take you through the steps for achieving this look. First I roughed up the dresser’s slick finish with an 80-grit sanding block, which allows the primer to adhere better. I removed all the drawers, covered the edges with painter’s tape, and gave the piece one coat of Zinsser primer. Next I added two coats of Benjamin Moore’s Glacial Till, a light putty color. I bought 3/4″ panel molding from Lowe’s, and I expected to be able to have it cut down in store. Unfortunately they were only able to do straight 90-degree cuts, and I was looking for a 45-degree miter cut. I was about to rent a (gigantic!) table saw from Home Depot, but luckily the …
I just wrapped up a master bedroom makeover in Marina Del Rey, a beachside neighborhood in Los Angeles. My clients’ original decor was sparse: a matching dark wood bedroom set and a light Ikea Malm dresser. Their windows were dressed with vertical Venetian blinds, which had been installed by the landlord, and translucent black and cream floral curtains. My clients wanted their new bedroom to be sophisticated and tranquil. They asked for contemporary furnishings, a neutral backdrop, and pops of vivid color. Their existing furniture was functional, but they were missing a few key items: a workspace and a comfortable place to curl up with a book. My first recommendation was to buy a new bed. I am not a fan of matching bedroom sets because they lack personality and distinctive flavor. My clients kept gravitating towards inspiration images of upholstered headboards, so I suggested we go in that direction. I hired a local craftsman to make a custom winged headboard with deep, diamond button tufting and silver nailhead trim. We were able to hand …
Those of you who follow my instagram or twitter may remember a vintage lucite swivel chair I posted a few weeks back. I found the chair on craigslist in a little town just north of New York City. The red vinyl was all torn up, and the lucite body was covered with scratches; but I loved the fundamental design of the piece and decided it was worth restoring. Here is the before and after: I decided to reupholster the chair in white fabric. The original mod red vinyl was certainly a cool look, but I wanted to give this chair a real transformation. I found a creamy Italian suede for an excellent price at the fabric store. I love the little perforations that reveal a silver backing. The fabric looks simple from afar, but has a bit of personality up close. The silver backing also coordinates with the chair’s hardware. I took the chair and my new fabric to my favorite local …
Chair back ring pulls have just started popping up on my radar, but I’m betting they’ll be a big new trend. They add a touch of glitz and distinction to any chair, and they would be an easy DIY project. My favorite part about this trend is the potential for holiday and party decoration. Drape a garland of greenery or secure a fresh flower. Tie on a beautiful ribbon. Attach goodie bags or seating name tags. The possibilities are endless. Sources: 1) William Hefner Architecture Interiors & Landscape 2) Politics of Pretty 3) Houzz 4) A Thoughtful Place 5) Beth Dotolo
I found a vintage mid-century side table on Craigslist a few months ago. It had great bones and a lovely wood grain, but unfortunately the tabletop was worn and deeply scratched. Since the rest of the piece was in good condition, I decided to buy the table and refinish the top. I will take you through the process, which can be applied to any simple refinishing project. Here are some close-ups of the original damage. That middle scratch was about 6 inches long and a few millimeters deep. The top was also several shades lighter than the rest of the table from years of use and wear. The Process The first step is to remove the original finish and sand down any visible scratches. I used an orbital sander to expedite the process, but you can certainly do this by hand. This table has a wood veneer, a thin decorative layer of higher quality wood that surrounds the central structure, …
I have always loved the look of ebonized cerused, or limed, oak. The overall finish is a deep black, while the wood grain is filled with white pigment. The sharp contrast accentuates oak’s beautiful grain patterns and creates a high-end, glamorous look. This finish can be achieved in any color combination, but the classic black and white is my personal favorite. This technique was originally developed in the 16th century as a way to protect wood from insects. Its popularity has ebbed and flowed over time, peaking in art deco and midcentury interiors. I followed Lynne Rutter’s wonderful tutorial over at The Ornamentalist. My table had a cerused finish originally, so I had to take a few extra steps to prep the surface. Two pieces of advice on this technique: Firstly, it is essential to create an absolutely clean surface to work with because aniline dye will not absorb through old varnish or residue. Starting with an unfinished piece would …
My sister, Elizabeth, asked for a little help tackling the last undecorated room in her home: a 4’ x 6’ sunroom. Elizabeth, an actress and screenwriter, wanted a comfortable place to read scripts and memorize lines. She requested a mid-century modern style that would complement her adjacent office. The room is not weatherproof, so we chose items that would not be ruined by sun damage or dust. Our maximum budget was $600. We found the armchair and ottoman on craigslist for $100. The chair is a mid-century reproduction from Urban Outfitters, so we aren’t worried about abandoning a valuable vintage piece to the elements. We purchased a 3’ x 5’ grey and white chevron rug for $80 from Potted, a fabulous garden store in Los Feliz. Our big budget splurge was a Modernica Case Study ceramic pot and Brazilian walnut stand, which we found on sale for $120. The Case Study planter is manufactured locally in Los Angeles. Our next …
I had been on the lookout for a campaign dresser for several months when I spotted the perfect piece on craigslist. It had sturdy dovetail construction and solid brass hardware. I was not a big fan of the original wood tone, so I decided to give the dresser a classic kelly green makeover! Here is an overview of the process. First I removed the hardware and gave the whole piece a good sanding. I used ScotchBlue painter’s tape to keep all my edges clean and then painted one coat of Zinsser primer. Primer will prolong the life of the finish. I decided to use Benjamin Moore Advance high gloss paint in jade green. It has a built-in self-leveling property, which helps hide brush strokes and provide a smooth finish. I ended up doing three (long and painful!) coats to get complete coverage. Fortunately this paint does not require a top coat. I also polished the hardware. You can use a …